| Installed Options |
Part No.
 | Description |
| LZC-TEM |
Digital Temperature Monitor. Monitors the temperature of the air flow exiting the chamber. Standard: Celsius. Can be factory pre-set to be Fahrenheit. |
|
| LZC-TIM |
Digital countdown timer. Shuts off unit after prescribed irradiation time. NOTE: Timer may not be exactly as shown. |
|
| LZC-G2 |
Two additional lamps installed, with UVA lamps provided. Available for LZC-1 and LZC-5. |
|
| LZC-F |
Customized lamp configuration on LZC-4 without changing the total number of lamps. Allows different side-top configurations. Available for LZC-4 |
|
| LZC-D |
Built in recessed magnetic stirrer and speed control. Available for LZC-4 and LZC-5 |
|
| LZC-A |
Installed motor to drive sample carousels LZC-B and LZC-C (below). Available for LZC-1, LZC-4, LZC-5 |
|
| Add-on Options |
Part No.
| Description |
| LZC-MGRX |
Customized Portable sample Carousel for 8 samples: require 2 C batteries (provided) |
|
| LZC-ECDH-Q |
Quartz cover for environmental chamber and disc heater 10” x 10” x 0.25” |
|
| LZC-ECDH-Py |
Pyrex cover for environmental chamber and disc heater 10” x 10” x 0.25” |
|
| LZC-ECDH |
Environmental chamber and disc heater, for full temperature control of biological applications at 37°C or for elevated temperature (up to 180 °C) curing under inert atmospheres |
|
| LZC-MGS |
Portable 12V (stand alone) magnetic stirrer and speed control. Up to 4 units fit in the chamber. |
|
| LZC-PM |
Power meter calibrated at 350nm. Provides an inexpensive way of monitoring light output with 20% accuracy. Available for all models |
|
| LZC-E |
220V transformer. Get the LZC-E5 (500 Watts) for the ICH model and 4V model, the LZC-E3 (300 Watts) works with all other photoreactors. |
|
| LZC-C |
Turntable for solid samples. Consists of an octagon about 9 inches in diameter. Requires option LZC-A installed. Available for LZC-4 and LZC-5 |
|
| LZC-TRN |
Portable turntable. Requires two C batteries. Fits in earlier photoreactor models. Can be added to any photoreactor after it has been built. |
|
| LZC-B |
Carousel ('Merry-go-round') for liquid samples. Holds 16 tubes. |
|
| LZC-MGR |
Portable sample carousel (accommodates up to 16 samples); requires two C batteries. Fits in earlier photoreactors. |
|
| LZC-Bx |
Extra disc for carousel for users that require non-standard tubes. |
|
| LZC-SG |
UV protecting safety goggles with > 400 nm cut-off. Note: one is provided with all photoreactors. |
|
| WP-01 |
Well Plate Environmental Chamber supplied with pyrex cover (quartz cover available at additonal cost) |
|
| WP-PC |
Replacement pyrex cover for WP-01 |
|
| WP-QC |
Quartz cover for WP-01 |
|
| UV-Shield |
UV-Shield for use with Expo panels and Ring Illuminator |
|
| LZC-TIM-E |
External Digital Countdown Timer. Compatible with several different products (both Luzchem products and others); enables any electrical equipment (110V or 220V) to shutdown after prescribed time (from seconds to 99 hours). 50/60 Hz |
|
| LZC Options |
Part No.
| Description |
| LZC-SK |
Pair of replacement lamp sockets |
|
| LZC-ST |
Lamp starters, package of 10 units |
|
| LZC-BT |
Lamp ballast |
|
| LZC-PM |
Power meter calibrated at 350nm. Provides an inexpensive way of monitoring light output with 20% accuracy. Available for all models |
|
| LZC-MAIN |
Photoreactor Maintenance Kit, includes 16 starters, 2 lamp ballasts, 2 pair replacement sockets and 16 VIS and 16 UVA lamps. |
|
